Home   » Component data   » Transistor data » this page

BDX34 Darlington Power Transistor Data

Highlight data for the BDX34 PNP Darlington transistor which includes electrical parameters, pinout, package type and many other key transistor datasheet details

The BDX34B and BDX34C are silicon epitaxial-base PMNP power transistors in monolithic Darlington configuration mounted in a JEDEC TO-220 plastic package.

They are intended for use in power linear and switching applications.

The complementary NPN devices are the BDX34B and BDX33C types which enable the design of complementary output stages.




Key details and performance parameters for the BDX34 darlington transistor.


BDX34 transistor datasheet parameters & data
 
Parameters Details
Transistor type 70W Darlington PNP
Package type TO220
VCBO max (V) -80*
VCEO max (V) -80*
VCEsat (V) 2,5V @ I 3 A
IC max (A) -10
Peak current ICM max (A) -15
Base current IB max (A) -0.25
TJ Max °C 150
PTOT mW 70
DC current gain hFE 750 min @ 3V
hfe 100 @ IC 1A & f = 1MHz
Similar / equivalents

    Outline:



    Pinout:



Explanation of transistor parameters


Parameter Explanation
VCBO Max Maximum collector-base voltage with emitter open circuit .
VCEO Max Maximum collector-emitter voltage with base open circuit.
VEBO Max Maximum emitter-base voltage with collector open circuit.
VCEsat (included where applicable) The voltage drop across the collector-emitter when the transistor is fully saturated (acting as a closed switch).
IC Max Maximum collector current.

Parameter Explanation
TJ Maximum junction temperature.
PTOT Max Maximum device dissipation normally in free air at 25°C unless other conditions indicated.
fT Min Minimum cutoff frequency at which the current gain in a common emitter circuit falls to unity.
COB Max Maximum collector capacitane, normally measured with emitter open circuit.
hFE DC current gain for HFE at IC. [Note hfe is the small signal gain and although this may be slightly different, the transistor current gain will vary considerably from ne transistor to the next of the same type.]
PTOT Max Maximum device dissipation normally in free air at 25°C unless other conditions indicated.

These are the main transistor parameters that have been included in our list. There are others, but these help quantify the main elements of the performance of the transistor.

 



Please note, that the data given is the best estimate we can give within a tabulated summary of this nature. Parameters also vary between manufacturers. Electronics Notes cannot accept any responsibility for errors, inaccuracies, etc, although we do endevaour to ensure the data is as accurate as possible.




Notes and supplementary information

 

  •   Availability & sources

The BDX34 is available from a number of stockists and electronic component distributors many of which are given in the table below.


BDX34 Component Distributor, Stock and Pricing

 


  •   Further information

Note *   There are two versions of the BDX34: the BDX34B which has a VCBO and VCEO max of -80V and the BDX34C which has maximum voltages of -100V.

  •   Internal schematic

When designing with a BDX34, it is very useful to know and understand the internal schematic. The resistors R1 and R2 provide improved switchinga and frequency response and the diode helps provide protection.

Internal schematic for the BDX34 Darlington transistor

The internal schematic provides insight into the operation of the device.

Ian Poole   Written by Ian Poole .
  Experienced electronics engineer and author.




    Return to Component Data menu . . .